The transportation of dangerous goods (TDG) requires special precautions depending on the type and characteristics of the materials transported. This training covers the main elements of the regulations in place to control their handling and transportation.

The safety of workers operating industrial machinery is a major issue for companies using this type of equipment. Accident prevention is a key element in protecting the health and safety of workers.
Manufacturers have responsibilities in terms of risk assessment and controlling risks. Encouraging collaboration between users and manufacturers is essential to achieving an acceptable objective in terms of risk control.
Choosing protection is a crucial step where we must apply the best possible solution to eliminate the risk. A risk analysis is carried out at this stage to identify all the resources needed to reduce the risk.

Whether at home or at work, hand protection is essential to prevent injuries and accidents. Your hands are precious and very vulnerable, as they are at the forefront of your daily tasks. In this training course, you will learn about risk analysis and controls, and how to select the right gloves for your job.

Good control of a telescopic lift truck during work is essential to prevent serious work accidents caused by this equipment. During this training, you will become aware of the types of inspection required, know the main components and particularities, understand the risks of use, apply the means of prevention, and know the safe operation.

Manufacturers have responsibilities in terms of risk assessment and controlling risks. Encouraging collaboration between users and manufacturers is essential to achieving an acceptable objective in terms of risk control.

During this training course, you will learn about all the steps involved in risk assessment, how to use the risk assessment tool and how to establish a list of hazardous phenomena to be assessed.

Controlling hazardous energies during installation, maintenance, repair or unjamming of equipment is essential to prevent serious work accidents caused by them. Lockout is one of the methods to use to control them. During this training, you will learn about the principles, tools and methods to isolate equipment from these energies and to lock out access to these sources, to prevent any uncontrolled use.

In many sectors, workers may be required to work alone or in isolated workplaces. While it's not always dangerous to work in an isolated location, there are circumstances where performing tasks in isolated locations can present increased risks to the worker's health and safety.

During this training, you will learn more about jobs and activities at risk in isolated locations, how to identify sources of risk that need to be controlled, appropriate means of communication, and emergency procedures for staying safe.

Modern slavery is a serious and widespread global issue that affects millions of people worldwide and can occur in any country or industry. Every organisation has a responsibility to understand modern slavery, recognise risks within its operations and supply chains, and take steps to prevent exploitation and protect human rights.
This eLearning course has been developed by the Slave-Free Alliance, a social enterprise owned by Hope for Justice, a global non-profit organisation dedicated to ending human trafficking and modern slavery. The course provides essential awareness training, helping you understand what modern slavery is, the different forms it can take, and why it is relevant to organisations and employees at every level.
Through real-world insights and practical guidance, you will explore common and hidden forms of exploitation, recognise subtle signs of control, understand organisational risks, and know what to do if they have concerns or need advice.

Risk management is a discipline that aims to identify, evaluate, and prioritize risks related to the company's activities, regardless of their nature or origin. This discipline implies that risks are treated methodically in order to reduce and control the probability of feared events, as well as their possible impact.

Job Safety Analysis (JSA) is a method of anticipating and analyzing hazards and risks in the workplace. It is a rigorous process, a tool to be favoured by any worker who is about to perform a task, and it usually takes only a few minutes to complete. It raises team awareness of the importance of health and safety, identifies risks by breaking down tasks into steps, develops accident prevention tools, and encourages the adoption of an occupational health and safety culture. It also helps prevent serious accidents and save lives.

40% of accidents involving cranes and rigging involve a load loss, the consequences of which are often dramatic. Operators are required to ensure the operational integrity of their equipment, to control the various operating maneuvers and to apply the best rigging practices when lifting loads. This online training covers four subjects:
Overhead crane: Basics and inspection
Load lifting and safe operations
Slinging and lifting accessories
Lifting signals

RECOMMENDED PREREQUISITE TRAINING:
* FALL PROTECTION AND PREVENTION - INTRODUCTION (SLIPS, TRIPS AND FALLS)
* FALL PROTECTION AND PREVENTION - LADDERS AND STEPLADDERS

Any worker having to work at heights should know the risks associated with his tasks, and know what means of protection to use, to prevent incidents.

As part of this training, you will learn more about the main risks of falling and the means of control, the life-saving procedure and the risks associated with hanging, as well as the inspection, adjustment, and maintenance procedures of personal fall protection equipment.

When health hazards associated with hazardous materials, tools or environments cannot be controlled by other means, workers must be equipped with personal protective equipment (PPE). This training covers clothing and accessories, their functions and proper use.

Accident investigation and analysis is not about finding a culprit. In this prevention activity, you will be able to determine how and, more importantly, why the accident occurred. Investing in this activity will prevent history from repeating itself. It allows the company to have better control over the risks. In the end, everyone wins!

L’assignation temporaire permet non seulement à l’entreprise de mieux contrôler les coûts liés aux événements accidentels, mais aussi d’aider le travailleur à se réadapter et à réintégrer plus sécuritairement le milieu de travail. Cette séance vous permettra d’élaborer ou de valider votre stratégie en lien avec le retour au travail de vos employés victimes d’accidents du travail.

The presence of contaminants in the working environment can have dramatic and harmful consequences for the health and safety of workers. It is important to receive training on contaminants so that you can identify them, assess the risks, and take the appropriate measures to control or eliminate these risks. In this training course, you will learn about atmospheric, physical, biological, and radioactive contaminants, as well as the preventive measures and personal protective equipment required for worker health and safety.

The Control of Substances Hazardous to Health (COSHH) is a comprehensive system for providing information on the safe use of hazardous materials in UK workplaces through labels, safety data sheets (SDS), worker education and training programs. This training will allow you to learn more about this system and its applications.

Risk assessments are a fundamental part of workplace health and safety, helping organisations identify hazards, understand risks, and implement appropriate control measures. This eLearning course is designed for those involved in carrying out or contributing to risk assessments.
The course explains what a risk assessment is, how to interpret relevant legislation, and how to follow a structured approach to identifying hazards, assessing risk, and applying control measures.

This training course is designed to inform you about the importance of prevention, hazards and preventive measures when using conveyors. Specifically, you will learn about accidents and rescue, conveyor types, conveyor design, safety and risk control.

RECOMMENDED PREREQUISITE TRAINING: * FALL PROTECTION AND PREVENTION - INTRODUCTION (SLIPS, TRIPS AND FALLS) * FALL PROTECTION AND PREVENTION - LADDERS AND STEPLADDERS Any worker having to work at heights should know the risks associated with his tasks, and know what means of protection to use, to prevent incidents. As part of this training, you will learn more about the main risks of falling and the means of control, the life-saving procedure and the risks associated with hanging, as well as the inspection, adjustment, and maintenance procedures of personal fall protection equipment.

Session de formation sur le système de cadenassage et autres méthodes de contrôle des énergies.