Lift trucks are now used everywhere, in all sectors, to handle heavy loads. The worker must therefore know the good practices to apply when using them.

As part of this training, you will learn more about the several types of lift trucks, accident causes, stability principle, operator safety, and general safety rules of the equipment.

Aerial work platforms provide a temporary work space and are an alternative to ladders or scaffolding. They can be used for inspections, maintenance or repairs.
This training will allow you to learn more about the safe and effective operation of a boom lift and aerial work platform.

Fire extinguishers are first response tool allowing to act on incipient fire. The source of a fire may vary, and using the wrong extinguisher type can not only be ineffective, but can, in some cases, aggravate a situation. This training covers the fire extinguisher types, and explains how to use them and maintain their good condition.

The transportation of dangerous goods (TDG) requires special precautions depending on the type and characteristics of the materials transported. This training covers the main elements of the regulations in place to control their handling and transportation.

40% of accidents involving cranes and rigging involve a load loss, the consequences of which are often dramatic. Operators are required to ensure the operational integrity of their equipment, to control the various operating maneuvers and to apply the best rigging practices when lifting loads. This online training covers four subjects:
Overhead crane: Basics and inspection
Load lifting and safe operations
Slinging and lifting accessories
Lifting signals

RECOMMENDED PREREQUISITE TRAINING:
* FALL PROTECTION AND PREVENTION - INTRODUCTION (SLIPS, TRIPS AND FALLS)
* FALL PROTECTION AND PREVENTION - LADDERS AND STEPLADDERS

Any worker having to work at heights should know the risks associated with his tasks, and know what means of protection to use, to prevent incidents.

As part of this training, you will learn more about the main risks of falling and the means of control, the life-saving procedure and the risks associated with hanging, as well as the inspection, adjustment, and maintenance procedures of personal fall protection equipment.

The human body has a usual internal temperature of 37⁰C or 98⁰F. Since the body reacts when its internal temperature varies (thermal discomfort, heat stress), it is important to know the causes and prevent them.

When health hazards associated with hazardous materials, tools or environments cannot be controlled by other means, workers must be equipped with personal protective equipment (PPE). This training covers clothing and accessories, their functions and proper use.

Description:
Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the creation of a lifting plan and the included items, the selection of lifting accessories and the correct attachment methods to use for the item to be lifted. In addition, you will discover the reasons for creating a critical lifting plan.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the important steps of load lifting, the roles and responsibilities of each worker involved in load handling, as well as the hazards that can compromise safety while handling a lifting equipment.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

Falling from a ladder or stepladder is one of the main causes of accidents. That is why the worker must know good practices of usage.

As part of this training, you will learn more about how to choose a ladder or stepladder according to the task to perform, how to inspect and use them safely, as well as the handling and storage of this equipment.

For a workplace to be safe, an organization must put in place the necessary measures to limit accidents and negative impacts on workers' health. A successful health and safety organization must have strong leadership from its managers and supervisors. This training will help you demonstrate leadership in occupational health and safety on a daily basis.

Using a scaffold to perform work at height exposes workers to several hazards, such as collapse or tipping of the scaffold. To avoid injuries or accidents, scaffolds must be erected in accordance with certain safety rules. This training covers the characteristics of the different types of scaffolding, the safety rules to follow, the steps for their assembly as well as the good practices to adopt.

Slips and falls are accidents in which a worker is thrown off balance while on the ground. These events, which still occur too frequently, can be avoided. This training will equip you to prevent falls and slips in the workplace.

Every day in our workplaces, we use tools. These objects that were invented to meet specific needs and help us in our tasks can also present safety risks. This training will allow you to learn more about the different types of manual and motorized tools as well as the safety rules to follow when handling them.

Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the important steps of load lifting, the roles and responsibilities of each worker involved in load handling, as well as the hazards that can compromise safety while handling a lifting equipment.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

Description:
Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the communication roles and responsibilities of the signaller and the operator, and the different signals for cranes and overhead cranes.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

Unique and essential e-learning training for your employees who make physical efforts and handle loads. Offered thanks to our partner Entrac, this training is applicable in all work environments. Principles & Fundamentals is solid!

Based on an understanding of ergonomic principles, Principles & Fundamentals is the foundation of your material handling prevention program. Practical, concrete and totally transferable to your operations.

Welcome to this training, offered thanks to our partner Entrac, aimed at helping you in the ergonomic adjustment of your workstation, whether in the office, in telecommuting or in hybrid mode.

Accident investigation and analysis is not about finding a culprit. In this prevention activity, you will be able to determine how and, more importantly, why the accident occurred. Investing in this activity will prevent history from repeating itself. It allows the company to have better control over the risks. In the end, everyone wins!