The safety of workers operating industrial machinery is a major issue for companies using this type of equipment. Accident prevention is a key element in protecting the health and safety of workers.
Manufacturers have responsibilities in terms of risk assessment and controlling risks. Encouraging collaboration between users and manufacturers is essential to achieving an acceptable objective in terms of risk control.
Choosing protection is a crucial step where we must apply the best possible solution to eliminate the risk. A risk analysis is carried out at this stage to identify all the resources needed to reduce the risk.

Whether at home or at work, hand protection is essential to prevent injuries and accidents. Your hands are precious and very vulnerable, as they are at the forefront of your daily tasks. In this training course, you will learn about risk analysis and controls, and how to select the right gloves for your job.

In some work environments, there may be contaminants present as gases, fumes, vapors, dusts or mists. In those cases, wear a respiratory protective equipment adapted to the contaminant to protect your respiratory tract. This training will allow you to learn more about the equipment available and how to adjust it.

The sounds emitted by certain equipment or the noise level of certain work environments could have a serious impact on workers' hearing if they are not adequately protected. When ambient noise cannot be reduced to a safe level with source mitigation measures, the use of hearing protectors becomes necessary. This training will allow you to learn more about the hearing protection equipment available and their proper use.

Data protection is a major issue for companies. Companies must obtain the explicit consent of individuals before collecting or processing their personal data. Consent must be free, specific, informed, and obvious. During this training, you will discover who the General Data Protection Regulation (GDPR) is intended for, the seven fundamental principles, the rights of individuals, and the actions to take in the event of a data leakage.

Same level falls, holes, mezzanines, scaffolding, platforms, ladders, stepladders, roofs, towers or skyscrapers, etc.: opportunities to fall are everywhere. Year after year, falls are among the leading causes of workplace deaths. This training addresses the main situations that expose workers to the risk of falls and includes the basic principles and techniques of fall protection to recognize and prevent potential hazards associated with working at heights.

RECOMMENDED PREREQUISITE TRAINING:
* FALL PROTECTION AND PREVENTION - INTRODUCTION (SLIPS, TRIPS AND FALLS)
* FALL PROTECTION AND PREVENTION - LADDERS AND STEPLADDERS

Any worker having to work at heights should know the risks associated with his tasks, and know what means of protection to use, to prevent incidents.

As part of this training, you will learn more about the main risks of falling and the means of control, the life-saving procedure and the risks associated with hanging, as well as the inspection, adjustment, and maintenance procedures of personal fall protection equipment.

Falling from a ladder or stepladder is one of the main causes of accidents. That is why the worker must know good practices of usage.

As part of this training, you will learn more about how to choose a ladder or stepladder according to the task to perform, how to inspect and use them safely, as well as the handling and storage of this equipment.

Slips and falls are accidents in which a worker is thrown off balance while on the ground. These events, which still occur too frequently, can be avoided. This training will equip you to prevent falls and slips in the workplace.

Slips and falls are accidents in which a worker is thrown off balance while on the ground. These events, which still occur too frequently, can be avoided. This training will equip you to prevent falls and slips in the workplace.

The sounds emitted by certain equipment or the noise level of certain work environments could have a serious impact on workers' hearing if they are not adequately protected. When ambient noise cannot be reduced to a safe level with source mitigation measures, the use of hearing protectors becomes necessary. This training will allow you to learn more about the hearing protection equipment available and their proper use.

Ladders and stepladders are common tools that nobody is concerned about. Yet, they cause an incredible number of accidents, some of which are very serious. This training will provide workers with the knowledge and working methods required to work safely on ladders or stepladders.

Same level falls, holes, mezzanines, scaffolding, platforms, ladders, stepladders, roofs, towers or skyscrapers, etc.: opportunities to fall are everywhere. Year after year, falls are among the leading causes of workplace deaths. This training addresses the main situations that expose workers to the risk of falls and includes the basic principles and techniques of fall protection to recognize and prevent potential hazards associated with working at heights.

RECOMMENDED PREREQUISITE TRAINING: * FALL PROTECTION AND PREVENTION - INTRODUCTION (SLIPS, TRIPS AND FALLS) * FALL PROTECTION AND PREVENTION - LADDERS AND STEPLADDERS Any worker having to work at heights should know the risks associated with his tasks, and know what means of protection to use, to prevent incidents. As part of this training, you will learn more about the main risks of falling and the means of control, the life-saving procedure and the risks associated with hanging, as well as the inspection, adjustment, and maintenance procedures of personal fall protection equipment.

La règle 26 « PROTECTION PAR SIGNAUX BLEUS » détermine comment installer les signaux bleus pour protéger les ouvriers se trouvant à proximité du matériel roulant. De plus, cette règle dicte comment se comporter en la présence de signaux bleus.

Capsule complémentaire sur les règles spécifiques de protection respiratoire chez Ortec (Anciennement Véolia)

Capsule complémentaire sur les règles spécifiques de protection contre les chutes chez Ortec (Anciennement Véolia)

Presentation on the introduction to radiation protection applicable to contractors performing work on Quebec Iron Ore’s site.

Please note that this training is offered with english subtitles.
As part of this training, you will learn more about the rules relating to respiratory protection, the types of contaminants found at the Westwood IAMGOLD mine site, their effects on health, how to detect them and how to protect yourself.

La règle 41 « PROTECTION DE TRAVAUX EN VOIE SUR UNE VOIE NON PRINCIPALE» détermine comment installer les signaux rouges qui ont pour but de protéger les travaux en voie non principale ou à proximité. De plus, cette règle dicte comment se comporter en la présence de signaux rouges.