During this training, you will learn about the best practices for working safely at home and in the workplace. Topics covered will include the importance of conducting a safety analysis of tasks, thoroughly inspecting your work environment and equipment before undertaking a task, and raising health and safety awareness among all household members to help achieve the goal of zero accidents.

The safety of workers operating industrial machinery is a major issue for companies using this type of equipment. Accident prevention is a key element in protecting the health and safety of workers.
Manufacturers have responsibilities in terms of risk assessment and controlling risks. Encouraging collaboration between users and manufacturers is essential to achieving an acceptable objective in terms of risk control.
Choosing protection is a crucial step where we must apply the best possible solution to eliminate the risk. A risk analysis is carried out at this stage to identify all the resources needed to reduce the risk.

Loading dock safety is crucial in many industries, including logistics, transport and distribution. Due to the nature of the operations conducted on loading docks, they present safety risks for workers, equipment and goods.

During this training course, you will learn more about the various risks encountered on loading docks, the preventive measures to be applied for each of these risks, and load securing methods.

Lead is a soft, silvery-grey metal that had been used for thousands of years before our era. It is extracted from lead ore but is increasingly being recycled. It is used, for example, in the manufacture of pipes, batteries, electronic equipment, chemicals, and coatings.
In this training course, you will learn about the risks of working with lead, its effects on the body, and how to prevent exposure.

Good control of a telescopic lift truck during work is essential to prevent serious work accidents caused by this equipment. During this training, you will become aware of the types of inspection required, know the main components and particularities, understand the risks of use, apply the means of prevention, and know the safe operation.

This training course covers the safe and efficient use of angle grinders. You will learn about tool components, inspection steps, disc selection and installation, personal protective equipment (PPE), and proper work practices to prevent accident hazards. At the end of this training course, you will be able to handle the angle grinder in a professional manner, while complying with safety standards.

Hard metals are mainly used in the manufacture of cutting tools, drills and other industrial and mining equipment. Hard metal dust is generated during various manufacturing and processing stages.
In this training course, you will learn about the risks of working in the presence of hard metal dusts, their properties, effects on the body and applicable means of prevention.

Controlling hazardous energies during installation, maintenance, repair or unjamming of equipment is essential to prevent serious work accidents caused by them. Lockout is one of the methods to use to control them. During this training, you will learn about the principles, tools and methods to isolate equipment from these energies and to lock out access to these sources, to prevent any uncontrolled use.

During this training course, you will learn more about the risks of exposure to various gases, their impact on health and the necessary safety measures. You will become familiar with the different types of gas, their properties, and the associated risks. In addition, you will learn how to use gas detection equipment properly, follow the steps required to ensure its reliability, and choose the right ventilation method to minimize the risk of gas exposure.

The safety of workers operating industrial machinery is a major issue for companies using this type of equipment. Accident prevention is a key element in protecting the health and safety of workers.

During this training course, you will learn about accident statistics, hazardous phenomena related to machine operation, and the types of injuries related to hazardous phenomena.

During this training course, you will learn about the development of an emergency response plan, the roles and responsibilities of those involved, assessing the risks inherent in your organization, determining the important actions to take depending on the type of disaster, the requirements for the various devices indicated on an emergency response plan, procedures in the event of an emergency and the essential elements of effective crisis management.

In some work environments, there may be contaminants present as gases, fumes, vapors, dusts or mists. In those cases, wear a respiratory protective equipment adapted to the contaminant to protect your respiratory tract. This training will allow you to learn more about the equipment available and how to adjust it.

The sounds emitted by certain equipment or the noise level of certain work environments could have a serious impact on workers' hearing if they are not adequately protected. When ambient noise cannot be reduced to a safe level with source mitigation measures, the use of hearing protectors becomes necessary. This training will allow you to learn more about the hearing protection equipment available and their proper use.

Lift trucks are now used everywhere, in all sectors, to handle heavy loads. The worker must therefore know the good practices to apply when using them.

As part of this training, you will learn more about the several types of lift trucks, accident causes, stability principle, operator safety, and general safety rules of the equipment.

40% of accidents involving cranes and rigging involve a load loss, the consequences of which are often dramatic. Operators are required to ensure the operational integrity of their equipment, to control the various operating maneuvers and to apply the best rigging practices when lifting loads. This online training covers four subjects:
Overhead crane: Basics and inspection
Load lifting and safe operations
Slinging and lifting accessories
Lifting signals

RECOMMENDED PREREQUISITE TRAINING:
* FALL PROTECTION AND PREVENTION - INTRODUCTION (SLIPS, TRIPS AND FALLS)
* FALL PROTECTION AND PREVENTION - LADDERS AND STEPLADDERS

Any worker having to work at heights should know the risks associated with his tasks, and know what means of protection to use, to prevent incidents.

As part of this training, you will learn more about the main risks of falling and the means of control, the life-saving procedure and the risks associated with hanging, as well as the inspection, adjustment, and maintenance procedures of personal fall protection equipment.

When health hazards associated with hazardous materials, tools or environments cannot be controlled by other means, workers must be equipped with personal protective equipment (PPE). This training covers clothing and accessories, their functions and proper use.

Description:
Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the creation of a lifting plan and the included items, the selection of lifting accessories and the correct attachment methods to use for the item to be lifted. In addition, you will discover the reasons for creating a critical lifting plan.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the important steps of load lifting, the roles and responsibilities of each worker involved in load handling, as well as the hazards that can compromise safety while handling a lifting equipment.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

Falling from a ladder or stepladder is one of the main causes of accidents. That is why the worker must know good practices of usage.

As part of this training, you will learn more about how to choose a ladder or stepladder according to the task to perform, how to inspect and use them safely, as well as the handling and storage of this equipment.