Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the important steps of load lifting, the roles and responsibilities of each worker involved in load handling, as well as the hazards that can compromise safety while handling a lifting equipment.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

Description:
Lifting devices are material handling equipment widely used in industrial sectors. Required for the transportation of heavy loads, they present multiple risks.

As part of this training, you will learn more about the communication roles and responsibilities of the signaller and the operator, and the different signals for cranes and overhead cranes.

Note that in addition to this theoretical training, practical training is often necessary and even mandatory, as is the case in Quebec. Ask your employer or project manager for more information.

The presence of contaminants in the working environment can have dramatic and harmful consequences for the health and safety of workers. It is important to receive training on contaminants so that you can identify them, assess the risks, and take the appropriate measures to control or eliminate these risks. In this training course, you will learn about atmospheric, physical, biological, and radioactive contaminants, as well as the preventive measures and personal protective equipment required for worker health and safety.

The sounds emitted by certain equipment or the noise level of certain work environments could have a serious impact on workers' hearing if they are not adequately protected. When ambient noise cannot be reduced to a safe level with source mitigation measures, the use of hearing protectors becomes necessary. This training will allow you to learn more about the hearing protection equipment available and their proper use.

Lift trucks are now used everywhere, in all sectors, to handle heavy loads. The worker must therefore know the good practices to apply when using them.

As part of this training, you will learn more about the several types of lift trucks, accident causes, stability principle, operator safety, and general safety rules of the equipment.

RECOMMENDED PREREQUISITE TRAINING: * FALL PROTECTION AND PREVENTION - INTRODUCTION (SLIPS, TRIPS AND FALLS) * FALL PROTECTION AND PREVENTION - LADDERS AND STEPLADDERS Any worker having to work at heights should know the risks associated with his tasks, and know what means of protection to use, to prevent incidents. As part of this training, you will learn more about the main risks of falling and the means of control, the life-saving procedure and the risks associated with hanging, as well as the inspection, adjustment, and maintenance procedures of personal fall protection equipment.

This training will help you demystify what the IOC Plant Project Management Framework is and how it can help you manage your projects.

Leading practitioners in project management;
Developing and continuously improving key documents;
Based on industry leading practices.

Tacora Resources is an innovative iron ore mining and mineral processing company focused on the acquisition, development, and operation of iron ore reserves and assets, which allow for the sale of high-grade iron ore products throughout the world. This training covers the material needed by contractors to access the pit.

During this training, you will learn about the Procurement Policy that must be followed to obtain all supplies, equipment, and/or services at the lowest cost to the company, while meeting and/or exceeding the end user’s specifications for performance, quality, reliability, and availability. This Policy emphasizes that all employees and/or its agents must observe a high standard of ethics, in conducting business on behalf of Equinox Gold.

This training course aims to improve your understanding of the plant’s operations, equipment, layout and processes. During this training, you will learn about the general principles involved in the ore processing of the concentrator and its circuits.

Dans le cadre de cette formation, les entrepreneurs et les nouveaux employés seront sensibilisés à la santé et à la sécurité au travail dans les installations de l’Administration portuaire de Montréal. Ils en apprendront notamment sur les travaux à risques, la sécurité électrique et ferroviaire, l’équipement de protection individuelle, les règles de sécurité et les mesures d’urgence.

During the training, you will learn key knowledge in office ergonomics: ergonomic risks, musculoskeletal disorders, ergonomic principles to respect in the office, etc.

You will learn how to make adjustments to the workstation while respecting ergonomic principles, regardless of the work environment and equipment;

You will develop strategies to intervene effectively and positively with work colleagues by promoting accountability and autonomy.


Following the training, the participant will have in their possession several practical tools, information capsules and reference documents to support them in carrying out the interventions.

Modules 1 and 2 (e-learning) allow participants to develop their ergonomic eye in various work contexts. The training approach focuses on understanding the principles of ergonomics, in all kinds of situations, through varied examples that are not specific to the reality of their company. This strategy allows you to have a fresh perspective and reduce biases linked to past experiences.

The participant will be able to identify the ergonomic risks present at a workstation (module 1). He will be able to prioritize the positions on which to act according to the real level of risk and to develop solutions based on the determinants of risk (module 2).



As an option, module 3 is offered in person. It allows participants to consolidate the learning of modules 1 and 2 and develop their knowledge to design or correct a workstation, a tool or equipment based on recognized ergonomic benchmarks. This part of the training is personalized to the reality of your company, via case studies and examples taken from your environment.

This training course is designed to raise awareness of the dangers of carbon monoxide (CO), a silent killer, and provide effective strategies for protecting yourself. Topics covered include the sources and risks associated with CO exposure, the symptoms of CO poisoning, and the preventive measures and protective equipment needed to minimize risks.

Cette formation vise à fournir aux participants les connaissances essentielles pour gérer efficacement un déversement en milieu de travail. En suivant cette formation, les participants exploreront en détail les étapes clés du Plan de mesures d'urgence (PMU), section 7. Ils apprendront également à comprendre et à assumer leurs responsabilités en cas de déversement, tout en analysant les implications environnementales, économiques et juridiques liées à un non-respect des procédures.

Understand the definition of a confined space.
Identify the roles and responsibilities defined by the work permit,
Adopt safe practices when working in a confined space by following procedures and wearing equipment.
Finally, an important section of this training will focus on the hazards and risks associated with working in a confined space in a shipyard.

Universal Lockout
This training course teaches students how to safely apply the lockout process according to Chantier Davie procedures to identify hazardous energy risks, lockout, unlockout, and restart equipment upon completion of work.

Naval Lockout
This training addresses the specifics of lockout in a naval context, where energy risks persist throughout construction or repair projects. Participants will learn how to integrate lockout while taking into account the unique realities on board ships.

This training course introduces Proco Construction's health, safety, and environmental rules. It provides workers with the essential knowledge they need to work safely in the factory and on the construction site. The course aims to teach participants how to recognize hazards, follow procedures, and wear the correct personal protective equipment (PPE) to work safely.

This health and safety orientation training allows all employees to familiarize themselves with each other’s roles and responsibilities, site access rules, and essential procedures for preventing accidents and maintaining a healthy work environment.
Participants will also learn about emergency procedures and expected behaviours in critical situations, as well as the environmental and sustainable development principles that must be adhered to.