WHMIS/GHS training in e-learning is an interactive and dynamic course based on scenarios where the participant will have to investigate on accidents related to the use of hazardous material. The participant will have to answer quizzes, categorize products, etc. Can you discover the causes of the accident? Become an investigator!
This training can be done with any recent Internet browser, 24/7, and without a trainer.

Les accidents de travail chez les jeunes travailleurs au Canada sont une préoccupation majeure. Tous les employeurs doivent veiller à ce que chaque jeune travailleur suive un programme d’accueil ou une formation en matière de santé et de sécurité au travail, avant de commencer toute tâche.
Au cours de cette formation, vous prendrez connaissance des risques et des règles en milieu de travail qui concernent le jeune travailleur; des enjeux liés aux chocs générationnels, aux tâches adaptées et à leurs différents droits; et des éléments importants d’un programme d’accueil et d’une bonne communication.

Whether at home or at work, hand protection is essential to prevent injuries and accidents. Your hands are precious and very vulnerable, as they are at the forefront of your daily tasks. In this training course, you will learn about risk analysis and controls, and how to select the right gloves for your job.

Au cours de cette formation, vous pourrez prendre connaissance de l’élaboration d’un plan de mesures d’urgence, les rôles et responsabilités des intervenants, d’évaluer les risques inhérents à votre organisation, déterminer les actions importantes à prendre selon le type de sinistre, des exigences relatives aux différents dispositifs indiqués sur un plan de mesure d’urgence, des procédures en cas d’urgence et des éléments essentiels à une gestion de crise efficace.

Risk management is a discipline that aims to identify, evaluate, and prioritize risks related to the company's activities, regardless of their nature or origin. This discipline implies that risks are treated methodically in order to reduce and control the probability of feared events, as well as their possible impact.

Job Safety Analysis (JSA) is a method of anticipating and analyzing hazards and risks in the workplace. It is a rigorous process, a tool to be favoured by any worker who is about to perform a task, and it usually takes only a few minutes to complete. It raises team awareness of the importance of health and safety, identifies risks by breaking down tasks into steps, develops accident prevention tools, and encourages the adoption of an occupational health and safety culture. It also helps prevent serious accidents and save lives.

In many sectors, workers may be required to work alone or in isolated workplaces. While it's not always dangerous to work in an isolated location, there are circumstances where performing tasks in isolated locations can present increased risks to the worker's health and safety.

During this training, you will learn more about jobs and activities at risk in isolated locations, how to identify sources of risk that need to be controlled, appropriate means of communication, and emergency procedures for staying safe.

Sodium hydroxide, also known as caustic soda or NaOH, is an essential chemical compound in numerous industrial and commercial fields. Its physical properties can make the product appear harmless, but in fact, it can lead to irreversible damage due to its pH. It is an extremely corrosive product, which can cause irreversible skin and eye injuries.
In this training, you will learn about its properties, storage, and associated hazards and first aids.

The sudden release of an energy source during installation, maintenance or repair work is still one of the main causes of serious work accidents. Therefore, energy control (whether electrical, thermal, gravitational, hydraulic or other) is a key element to performing work safely.
This lockout e-learning training deals with fundamental principles, tools and methods used to isolate equipment from these energies, and to lock access to these sources to avoid any uncontrolled use.

Good control of a telescopic lift truck during work is essential to prevent serious work accidents caused by this equipment. During this training, you will become aware of the types of inspection required, know the main components and particularities, understand the risks of use, apply the means of prevention, and know the safe operation.

Data protection is a major issue for companies. Companies must obtain the explicit consent of individuals before collecting or processing their personal data. Consent must be free, specific, informed, and obvious. During this training, you will discover who the General Data Protection Regulation (GDPR) is intended for, the seven fundamental principles, the rights of individuals, and the actions to take in the event of a data leakage.

Risks considered as critical are those that can cause serious permanent damage or even death to workers.
Each type of work or operation causes different critical risks. Therefore, it is important not only to know the critical risks, but to target and prioritize each specific intervention for each environment.

Our era is marked by the extensive and widespread use of technology. Everything is increasingly accelerated, even our interactions. In the age of rapid communication, we can easily lose the essence of messages.
Human contact, accompanied by emotions, enables us to communicate more effectively than with an emoticon symbolizing our mood of the day.
Communication is an art, and mastering it requires practice and patience!

Did you know that hearing does not regenerate? Hearing damage is irreversible. A hearing aid can, at most, compensate, but will never restore a person’s hearing. Someone subjected to 100 dB (noise of a lawnmower) for 40 hours a week, after 20 years, will, on average, experience a 48% hearing loss. Through this online training, the worker will be made aware of the importance of using adequate hearing protection to preserve their hearing health.

Airways are threatened when the air contains pollutant particles in the form of dust, gas, smoke or biological contaminants or when the environment lacks oxygen. Through this online training, the worker will understand the importance of using respiratory protection to preserve the respiratory tract and overall health.

Same level falls, holes, mezzanines, scaffolding, platforms, ladders, stepladders, roofs, towers or skyscrapers, etc.: opportunities to fall are everywhere. Year after year, falls are among the leading causes of workplace deaths. This training addresses the main situations that expose workers to the risk of falls and includes the basic principles and techniques of fall protection to recognize and prevent potential hazards associated with working at heights.

An online training activity designed to ensure the health and safety of all workers on a work site. In short, this training will enable end-users to improve their use of pallet trucks. More specifically, users will learn about the different components of pallet trucks, the legal framework governing their use, the types of inspections and safety rules, as well as the risks and preventive measures.

Every year, many people die while performing work in confined spaces. Among these casualties, 60% of them were improvised rescuers. Failure to respect procedures, forgetfulness or negligence can turn into a fatal accident. This training deals with the fundamental principles surrounding work in confined spaces.

During this training, you will learn about the different types of asbestos and their health related risk. Also, you will be informed on where you should be cautious to the presence of asbestos in your work environment. This training is an introductory to asbestos.

In the industrial sector, carcinogenic substances are "time bombs". They are present and often unrecognized, and their negative effects on the body generally only appear decades later.
During this training course, you'll learn more about the types of exposure to contaminants and their effects on health, the usefulness of laboratory research, and how to protect the health and physical integrity of a person forced to work with carcinogenic products.

It is not unusual that fires in the workplace occur during the execution of a quick five-minutes task in an area which is not suitable for welding and cutting. The Hot Work e-learning is a dynamic and interactive training that can be carried out with your web browser 24 hours a day, 7 days a week, without any supervision.